Z Clip System for Installing Glass, ACM or Phenolic Panels

For glass, ACM or HPL phenolic panels where substrate can’t be attached with a screw

  • 1/2 inch clearance required between the top of the panel and the ceiling
  • 6063-T6 Aluminum
  • (2) Strips of 3M VHB Tape Pre-Applied for Peel and Stick Application
  • Easily Used for Mounting Phenolic, ACM, Aluminum and back painted Glass Panels
  • The MFTAPE can also be used with unpainted glass panels by substituting a primer and a tape variation (please inquire for pricing)
  • Each 1 ft of Clip is rated for 7.5 pounds of shear strength using a 5x safety factor
  • 3M has a technical article here on how to prepare your panel for tape adhesion
  • Suitable for Interior Applications (Examples in 3M Design Guide)
  • Pairs with MF375 Clip for Material Savings
  • Redesign of Clip to optimize adhesion with tapes
  • Clip can also be purchased without the 3M tape for use with your preferred vendor of glazing tape

Get a Quote

Material Aluminum
Stock Clip Size 2 Inch
Stock Continuous Length 72 Inch, 144 Inch
Custom Lengths Available Any
Lift Off (1) 3/8 Inch
Projection (2) .293 Inch
Availability Same Day Shipping

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel.
(2) The “Projection” is the distance that the panel sits out from the wall.