Monarch Z Clips Video
This video demonstrates how the
Monarch Z Clips work.
What is the load rating or weight bearing capacity of the Monarch Z Clips? i.e., How much weight can a Monarch Z Clip hold?
We do not make structural recommendations. Monarch Z Clips are extruded from 6063-T6
aluminum. By itself, Monarch Z Clips will withstand thousands of pounds of stress, both
compressive and tensile. The concern should not be with the structural integrity of the clip, but
with integrity of the substrate you are screwing into and the hardware you are using. Taking
four #8 x ¾" pan head screws, and two MF625 - 1 ½" Z-CLIPS, we mounted the Monarch Z
Clips to two 2x4s and connected them both together. We put a load on the assembly trying to
break the connection. It failed at 475lbs, the screws pulled out of the wood and NO VISIBLE
DAMAGE WAS NOTED TO THE Z-CLIPS.
What can I do to add strength to the Monarch Z Clip hanging
system?
To increase the strength of the system for overweight items, you need to increase the number
of fasteners (screws). On the panel side, this means decreasing the spacing between the
Monarch Z Clips. On the wall side, it can mean using multiple screws at each stud or installing
a piece of plywood blocking in front of the wall and securing the continuous length with
fasteners every 8" or 4", instead of 16" or 24".
What else are Monarch Z Clips used to hang?
Wall panels, acoustic panels, elevator panels, signage, artworks, etc. MONARCH Z CLIPS are
so versatile that the possibilities are limitless. Our customers tell us they also use them for
stone veneer, book shelves, head boards, mantels, wall tapestry, picture frames, mirrors and
the list goes on and on.
Do you have a minimum order?
No. You can buy as little as a bag of 20 Monarch Z Clips or just 1 continuous length of 6' or 12'.
What is the difference between the MF375 and MF625
Monarch Clips?
For most installations, there is very little tangible difference. The MF375 clip has a shorter
lift-off of ⅜" vs. ⅝" for the MF625 clips. What this means is that if you want to have a ½'' reveal
between the top of the panel and the ceiling, you would need to select the MF375 clip, which
would give you ⅛" to mount the panel. Some of our customers also tell us that the longer
length of engagement in the MF625 clip helps to reduce the vibration, particularly in acoustic
panel installations.
What configuration of panel clips and wall mounts do you
recommend for a 4 x 8 panel?
We do not make structural recommendations. Our customers tell us that for a 4' x 8' ¾'' MDF
Veneered Panel they will run three continuous lengths along the walls and mount 3 rows of 4
Monarch clips on the panel side to align with the continuous lengths.
Can I use an adhesive with the clip?
Yes. The fluting in the clip is designed to increase the surface area for the adhesive to grab the
clip. Because aluminum oxidizes, you should clean the aluminum with an abrasive cleaner
before applying the adhesive to allow for the strongest hold. 3M has an industrial adhesives &
tape division with a help desk that is very good at giving recommendations. You can reach
them at 800-362-3550. You will need to know the material of the Monarch Z Clip (aluminum),
the item to be hung and the environmental conditions.
Can you drill the holes and cut to length to help me save time on
the job site?
Yes. We will custom cut the Monarch Z Clips or other aluminum extrusion to any length you
specify.
It is great that the Monarch Z Clips allow for easy removal of
panels, but what about applications where I don't want the panels
to be able to be removed?
This is easily solved by putting a dab of silicone or PL400 in the clip engagement area. The
silicone or PL400 provides a strong, flexible hold.
Are you LEED certified?
We have a standard recycled content letter we can provide showing that >75% of the
aluminum content is Post Industrial or Post Consumer scrap. Our Monarch Z Clips are 100%
recyclable aluminum.
What size screws can I use with your Monarch Z Clips?
A #8 pan head screw. We sell #8 Pan Phillips Black Oxide Screws in lengths of ½", ⅝" and ¾".
There is ⅛" clearance for the head of the screw when the clips are engaged and the specified
height of a #8 pan head screw is 0.096". A few times per year customers will contact us not
understanding why the #8 screws they bought on the Internet will not fit with the Monarch Z
Clips and on all occasions this has been because the screws they purchased were cheap
imports and outside of the specifications for a #8 screw. You can test this yourself by simply
measuring the head of the screw with a Vernier Caliper.
Will you ship directly to a job site?
Absolutely.
Do you ship International orders?
Yes, every day.
Can you paint the Monarch Z Clip if it is going to be seen in the
reveal?
Generally, if you are installing a panel that is ¾" thick with a ⅛" reveal, it will be very difficult to
see anything except dark space between the panels. In situations where it is critical that the
wall mounted length not be seen, some customers tell us they will spray paint the exposed
z-clip black at the point of the reveals.
How should I use a Monarch Z Clip to hang a picture frame?
Our customers use our Monarch Z Clips to mount picture frames all of the time. The important
thing to keep in mind when mounting a picture frame that is 4 separate pieces glued together is
to make sure the Z Clips are mounted on the side panels of the frames to prevent the corners
of the frame from coming un-glued.
Can I use your Monarch Z Clips to secure a headboard?
Yes. Most customers choose our MF625 Monarch Z Clip because of its longer length of
engagement and shorter projection from the wall. Most customers will run 2 continuous
lengths along the wall 2 to 4" inside the ends of the head board and mount the Monarch Z
Clips every 12" on the back of the headboard.
What is the shipping lead time for stock items?
Stock items ship same day for orders received before our shipping deadlines.
Can I use your Monarch Clips to mount wall pads?
Yes, customers do this all of the time. You can hang them like you would a wall panel, but be
sure to apply a dab of silicone or PL400 to the engaged area to prevent the Monarch clips from
becoming disengaged.